This new series of pure sine wave inverter Advance has toroidal transformer, and the consequent advantage to have very low consumption compared to classic models with laminated transformer (ca 60-70% less, depending on model).
By using this type of inverter will then have greater autonomy of the batteries, at the same power, and longer life of the batteries themselves
These inverters can be combined either with photovoltaic systems that wind or hydroelectric turbines. They are also used as an AC adapter and / or UPS in case of power failure.
In more detail:
> Use as Inverter Off-Grid
If there is no presence of the network, the drive performs its basic function, which converts the direct current from the battery into 230V AC necessary to the equipment to be powered. The inverter, with a simple switch, can be set up to give priority to the batteries and switch in case of low battery on an external source (public grid or generator) and then switch back on once the batteries recharged.
> Use as battery charger
Fueling the drive with a 220V line, you can recharge 12V, 24V, 48V (depending on model of inverter)
> Use as UPS
Use as UPS is ideal in areas with a high percentage of poor national network.
In this mode, the inverter performs the function of keeping the battery charge, and in case of power failure (ie power outages) automatically switches the power on the battery, thus ensuring the continuity of electricity until the battery discharge same.
As soon as the power is restored electricity, the inverter assigns priorities, and automatically returns to the function of the charger, then recharging the batteries to support a future blackouts.
Maximum continuous power: 1000W
Instantaneous peak: 3000W
Consumption: 15W (instead of 40 W model with classical transformers)
Voltage AC Input: 194-243V
Input frequency: 50Hz
AC output voltage: 230V
Output frequency: 50Hz
Waveform: Pure Sine
Trip time from network to battery: <10ms (including detection time)
Charging current: 40 A max
Charging time depends on the power and type of batteries
Temperature range: 0C ÷ 35C (ideal 15C ÷ 25C)
Humidity range: 0-95%, non-condensing
Dimensions in mm: 442 x 218 x 179
Weight kg: 14
Indications of inverter operation is displayed via LED backlit multi-function display.